Schneider TeSys F series three-pole contactor LC1F800MW
in stock
main information
Product line TeSys
Product nameTeSys F.
Product type contactor
Product referred to as LC1F
Contactor application field for AC load with power factor greater than or equal to 0.95
Squirrel cage motor for normal startup of the switch
Use category AC-4 AC-1 AC-3
Number of poles 3P
Electrode contact composition 3 NO
Rated operating voltage [Ue] <= 1000 V AC 50/60 Hz
<= 460 V DC
Rated operating current [Ie] 1000 A 40°C)on ... <= 440 V AC AC-1
800 A 55 ° C at temperature <= 440 V AC AC-3)
Motor power (kW) 450 kW ... 1000 V AC 50/60 Hz (AC-3)
500 V AC 50/60 Hz (AC-3) 450 kW
475 kW ... 660 ... 690 V AC 50/60 Hz (AC-3)
110 kW... 400 V AC 50/60 Hz (AC-4)
450 kW ... 380 ... 400 V AC 50/60 Hz (AC-3)
450 kW,... 415 V AC 50/60 Hz (AC-3)
450 kW ... 440 V AC 50/60 Hz (AC-3)
250 kW ... 220 ... 230 V AC 50/60 Hz (AC-3)
Control loop voltage 220 ... 230 V DC
220 ... 240 V AC 40 ... 400 Hz
Coil type standard
extra information
Rated impulse withstand voltage [Uimp] 8 kV
Overvoltage category III
Traditional heating current [Ith] 1000 A ... <40°C
Rated breaking capacity of 6400 A, in accordance with IEC 60947-4-1
Rated short-time withstand current [Icw] 5500 A on ... <40°C - 10 s
4600 A ...... <40°C - 30 s
3600 A ...... <40°C - 1 minute
2600 A ...... <40°C - 3 minutes
1700 A ...... <40°C - 10 minutes
Fuse for use with relay 1000 A gG... <= 440 V.
800 A aM on ... <= 440 V
Average impedance 0.12mΩ - Ith 1000 A 50 Hz
Rated insulation voltage [Ui] 1000 V in accordance with IEC 60947-4-1
1500 V in accordance with VDE 0110 Group C
Power consumption per pole 120 W AC-1
77 W AC-3
installation method
Compliance with IEC 60947-1
JIS C8201-4-1
EN 60947-4-1
EN 60947-1
IEC 60947-4-1
Product Certification ABS
UL
CCC
CSA
RMRoS
IEC CB report
Wiring capacity control circuit: bolted 1 cable 1 ... 4 mm2 wire without belt
Control circuit: bolt fastening 2 cable 1 ... 4 mm2 wire no
Control circuit: bolted 1 cable 1 ... 4 mm2 wire
Control circuit: bolted 2 cable 1 ... 2.5 mm2 wire
Control circuit: bolted 1 cable 1 ... 4 mm2 hard wire without
Control circuit: bolt fastening 2 cable 1 ... 4 mm2 hard wire without
Power circuit: terminal 2 cable bus cross section: 60 x 5 mm
Power circuit: bolted
Tightening torque control ring: 1.2 N.m
Power circuit: 58 N.m
Control voltage limit operation: 0.85 ... 1.1 Uc 55 ° C)
Release: 0.3 ... 0.5 Uc 55°C)
Surge power (W) 1900 W 20 ° C)
Maintain power consumption (W) 12 W, temperature 20 ° C
Cooling 12 watts
Action time 40 ... 50 ms rest
60 ... 80 ms off
Mechanical life 5 kA2.s
The highest working frequency is 600 times/hour... <55°C
Model LC1F
Motor power range 250 ... 500 kW ... 200 ... 240 V 3 phase
250 ... 500 kW ... 380 ... 440 V 3 phase
110 ... 220 kW on ... 200 ... 240 V 3 phase
250 ... 500 kW ... 480 ... 500 V 3 phase
Motor starter type direct online contactor
Contactor coil voltage 220 V DC standard
230 V DC standard
220 V AC standard
230 V AC standard
240 V AC standard
surroundings
IP protection class IP20 front panel with protective cover in accordance with IEC 60529
IP20 front panel with protective cover, in accordance with VDE 0106
Protective measures TH
Working temperature -5 ... 55 ° C
Storage ambient temperature -60 ... 80 °C
Ambient temperature -5 ... 55 ° C
2
Working height is 3,000 meters without
Height 304 mm
Width 309 mm
Depth 255 mm
Product weight 18.75 kg
