DWCT
Features and advantages of programmable linear DC power supply from DP832:
1. 3 Outoutput: 30V / 3A; 30V / 3A; 5V / 3A, maximum total power 195W
2. Low ripple noise: 350uVrms / 2mVpp
3. Excellent power supply adjustment rate and load adjustment rate
4. Fast transient response time: 50us
5. Standard overpressure / overcurrent / overtemperature protection
6. Standard with output timer, optional switch delay, analyzer, monitor, set preset, trigger synchronization and other advanced functions
7 Built-in V, A, W measurement and waveform display function
8. 3 Channel output for independent control
9. Isolation between channels: CH1 / / CH2, CH3
10. Rich interfaces, standard with: USB Host & Device, optional: LAN, RS232, support for GPIB, digital IO
11. A 3.5-inch TFT screen with a similar VFD display
General source DP832 programmable linear DC power supply
Model number DP832
Three-way output channels
Total output power
Output gear / channel 30V / 3A; 30V / 3A; 5V / 3A adjustable
Load adjustment rate, ± (output percentage + bias) voltage: 0.01% + 2mV; current: 0.01% + 250uA
Linear adjustment rate, ± (output percentage + bias) voltage: 0.01% + 2mV; current: 0.01% + 250uA
Waves and noise (20~20MHz) constant voltage: 350uVrms / 2mVpp (20HZ-20MHz); constant flow: 2mArms
Programming annual accuracy voltage: ± (0.05% + 10mV); current: ± (0.2% + 10mA)
Reading back annual accuracy voltage: 0.05% + 5mV; current: 0.15% + 5mA
Programming resolution: 10mV / 10mA; high-resolution option: 1mV / 1mA
Transient response time
Stability, ± (output percentage + bias) voltage: 0.02% + 2mV; 0.02% + 2mV; 0.01% + 1mV; current: 0.05% + 2mA; 0.05% + 2mA; 0.05% + 2mA
Protection function overpressure, overcurrent, secondary overtemperature
Display a 3.5-inch TFT, imitation VFD display
Interface is standard with USB Host & Device
Dimension weight, width and depth =239mm (W) x 157mm (H) x 418mm (D) Weight: 9kg
