Jet Mud Mixer for drilling mud treatment is foundation engineering. Jet Mud mixer is special equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration. That is used to mix water and bentonite powder and cement powder with water. The mixing principle is done either by impeller or by venturi throttle, in both cases the aim is to generate enough shear to end up in a colloidal. The effect is more prominent matching with Shear Pump.
-
Jet Mud Mixer detail is as below:
-
Hoppers can be Venturi hopper.
-
Ideal design on sufficient working pressure make pumps higher performance.
-
New style with better feasibility under different working condition.
-
Meet drilling fluids weighting demand for 1500m ~ 9000m well drilling.
-
Hopper and pump connected with pipelines. More flexible on hopper and pump quantities.
-
Centrifugal pump is mechanical seal type. Reliable and durable.
-
Easy to operate and maintain.
Jet Mud Mixer Technical Parameters
|
Model
|
TRSLH150-50
|
TRSLH150-40
|
TRSLH150-30
|
TRSLH100
|
|
Matching Pump
|
SB8×6-13(55kw)
|
SB6×5-13(45kw)
|
SB5×4-14(37kw)
|
SB4X3-11(15kw)
|
|
Capacity
|
1056GPM
|
792GPM
|
528GPM
|
264GPM
|
|
Work Pressure
|
0.25~0.40Mpa
|
0.25~0.40Mpa
|
0.25~0.40Mpa
|
0.25~0.40Mpa
|
|
Inlet
|
150mm
|
150mm
|
150mm
|
100mm
|
|
Nozzle Caliber
|
50mm
|
40mm
|
30mm
|
30mm
|
|
Hopper Dimension
|
750x750mm
|
750x750mm
|
600x600mm
|
600x600mm
|
|
Burden Speed
|
≤100kg/min
|
≤80kg/min
|
≤60kg/min
|
≤40kg/min
|
|
Density
|
≤2.8g/cm3
|
≤2.8g/cm3
|
≤2.8g/cm3
|
≤1.5g/cm³
|
|
Viscosity
|
≤120s
|
≤120s
|
≤120s
|
≤60s
|
